Max 8/16 and T1/E1 User’s Guide – Chapter 5
Page 57
Voice Message File Upload/Download
Procedure
To implement the file upload/download procedure, you will need:
a PC with LAN connection to Max 8/16 or T1/E1
the DOS FTP client program (included with all Microsoft
operating systems).
the Max 8/16 or T1/E1 voice message binary file, “vocfile” (for
upload)
Voice Message File Download Procedure
1. Power-on the Max 8/16 system and wait until the “OPR” LED
begins to blink.
2. Obtain the Max 8/16’s current IP address (see Chapter 2 in
this Guide).
3. On your PC, open a DOS window or Command prompt.
4. Go to the PC directory to which you want to download the
vocfile.
5. Establish an FTP connection with the Max 8/16 as follows:
from the DOS prompt, type
ftp
, a space, and the IP address
of the unit, and then press the Enter key. For example:
ftp
192.168.172.19
Enter (use your Max 8/16’s IP address).
6. At the
User <192.168.172.138:<none>>
prompt, enter the
default User Name,
root
, and then press the Enter key.
7. When prompted for a password, enter the default password,
n2p
, and then press the Enter key. The password does not
display on the screen as you type it.
8. At the
FTP>
prompt, type
get
vocfile
, and then press the
Enter key.
You may now access the vocfile in the directory to which it
was downloaded.
Figure 32, below, illustrates the FTP file download procedure.
