Max 8/16 and T1/E1 User’s Guide – Chapter 4
Page 39
A
DDING AN
E
NTRY TO THE
C
URRENT
R
OUTING
T
ABLE
To add an entry to the Current Routing Table (see Figure 20 in
Routing Table Configuration section earlier in this chapter):
1. In the I/F field (interface type), select the appropriate
interface.
Interface type Description
FXS
Interface for analog telephone
VoIP
Interface for IP network
2. To apply the entry to all the ports, enter
0
for the PORT
number. Otherwise, enter the logical port number that will
correspond with the given index number.
3. In the NUMBER field, type the number you would like to
route.
4. In the TRNC field, enter the number of digits you would like
truncated from the number being dialed.
5. In the PRE field, enter the number of digits you would like
added to the front of the telephone number being truncated.
6. In the POST field, enter the number of digits you would like
added to the end of the telephone number being truncated.
To delete an unwanted entry, simply type its index number in the
Delete Entry box and click the Delete Entry button.
NOTE: The two VoIP entries in the Current Routing Table
cannot be deleted, as they are necessary for correct
operation of the Max 8/16 or T1/E1 system.
After the desired changes have been entered, click the Save button
to save them. The unit must then be rebooted. Refer to Restart
System, located on page 46 in this Guide, to activate the new
settings.
