Max 8/16 and T1/E1 User’s Guide – Chapter 4
Page 50
b. For each port that has a setting of Y in the FAX Only
field, click the N radio button. If no ports are set to Y,
you can proceed to the Performing the Upgrade
section below.
c. Click the Save Changes button at the bottom of the
page to save the settings.
Once you have completed this procedure, proceed to the following
section, Performing the Upgrade.
P
ERFORMING THE
U
PGRADE
To upgrade the Max firmware:
1. Click the Download button to download the executable file to
the C:\Net2Phone\Upgrade folder.
2. Open your Windows Explorer and navigate to the
C:/net2phone/upgrade folder. Double-click the maxup.exe
file to begin the upgrade process.
3. You will be prompted for the following information:
a. User Name
b. Password
c. Max IP Address
4. Follow the remaining prompts to complete the upgrade.
If you encounter any problems after you have upgraded the Max,
including faxing, calling, receiving calls, etc., re-load the factory
default settings and re-enter your configuration settings.
To re-load the factory default settings and re-enter your
configuration settings:
1. In the Web Manager, click the Load Default Config link in
the sidebar menu.
2. Click the Load button.
3. Reboot the device.
4. In the Web Manager, re-enter any settings that you may have
modified from the original default configuration based on the
configuration settings that you printed out before the
upgrade.
NOTE: If you encounter problems with the Max after
upgrading, Net2Phone recommends that you reset the
factory defaults and re-enter your settings.
