Max 8/16 and T1/E1 User’s Guide – Chapter 6
Page 61
NOTE:
If the LAN to which either Max is connected
employs a firewall, you need to configure
settings on both the Max unit and the firewall
before you can place Max-to-Max calls. For
information about configuring a firewall, refer
to Configuring Firewalls on page 22 in this
Guide.
In Max-to-Max calling, the receiving port’s
Account Information table settings must be
configured to permit it to receive calls. For
details, refer to Receiving Max-to-Max Calls on
page 34 in this Guide.
Refer to your Reseller for information about
Net2Phone’s Max-to-Max calling rates.
To make a call:
1. Pick up your telephone handset, and listen for a dial tone.
2. Using your telephone keypad, dial the number of the person
you want to call.
•
For all domestic calls within the US, dial 1 + area
code + 7-digit telephone number.
•
For international calls placed from the US, dial 011 +
country code + city code + telephone number.
•
If you are calling from outside the US to the US, dial 1
+ area code + 7-digit telephone number.
•
If you are calling from outside the US, dial 011 +
country code + city code + telephone number.
TIP: If you press # after entering the telephone
number, the call will be sent more quickly.
The call will be placed.
8. When you have finished with your call, simply hang up your telephone
handset.
9. To place another call, pick up your telephone handset, and repeat the steps
above.
