Max 8/16 and T1/E1 User’s Guide – Chapter 4
Page 49
Upgrading the System Software
Click the Download Latest Firmware link to access the Software
Upgrade page, illustrated below.
Figure 31 – Software Upgrade Page
IMPORTANT: Before upgrading to version 1.5.10, you
should follow the Preparing for the Upgrade section below
to ensure that the Max’s fax features will work properly.
P
REPARING FOR THE
U
PGRADE
BEFORE upgrading to version 1.5.10, follow these procedures:
1. If you do not have a copy of your Max 8/16 or T1/E1
configuration settings, including any fields that you modified
from the original factory default settings, you may want to
take a snapshot of the settings for future reference. Simply
print each configuration page from the Web Manager and save
the hard copy for future reference.
2. Check the FAX Only port settings via the Web Manager. If
any ports are set to Yes (Y), you must clear the settings
before upgrading. Doing so will ensure that after the
upgrade, the faxes will be transmitted using the T.38 fax
protocol on the Net2Phone network.
a. In the Web Manager, click the Account Config link in
the sidebar menu.
