Max 8/16 and T1/E1 User’s Guide – Chapter 4
Page 28
single DID account, and click the Use account for all ports button.
When you click the Announce Account Balance box in the Account
Information screen, you can now check the remaining balance on
your Net2Phone account.
S
INGLE
A
CCOUNT
M
ANAGEMENT
For single account management:
1. In the Port #1 field in the Account column, enter a Net2Phone
account number.
2. In the PIN field, enter the Personal Identification Number for
that account.
3. Check the Use account for all ports checkbox.
4. If you wish to be able to receive incoming Max-to-Max calls on
a given port, select the Y radio button in its Login column.
5. After the desired changes have been entered, click the Save
button at the bottom of the page to save them.
6. Click the Restart System link on the Site Map page to reboot
the system.
NOTE:
To receive Max-to-Max calls when multiple ports are
sharing a single account, only one of the ports sharing the
account may have the Y selected.
Only one call at a time can be made using any given
account number.
If a Net2Phone account number is entered for an FXO port
in the Account Configuration Table, the account entered
acts as a “default” account for the port. Charges incurred
by callers through that port automatically accrue to this
account.
Whenever a selection in the Login column is modified, the
Max must be restarted before the change will take effect.
M
ULTIPLE
A
CCOUNT
M
ANAGEMENT
For multiple account management:
1. For each port that is connected to a telephone or PBX/KPS, enter
the account number and PIN you intend to use with that port.
2. Make sure that Use account for all ports is NOT checked.
3. After the desired changes have been entered, click the Save
button to save them.
4. Click the Restart System link on the Site Map page to reboot
the system.
