Trunk Disconnect Continue/Disconnect Codes
Program
Number
Program Name
Default
14-01-25
Basic Trunk Data Setup - Continued/Discontinued
Trunk-to-Trunk Conversation
0
20-28-01
Trunk to Trunk Conversation - Conversation Continue
Code
not assigned
20-28-02
Trunk to Trunk Conversation - Conversation Discon-
nect Code
not assigned
20-28-03
Trunk to Trunk Conversation - Conversation Continue
Time
0 (seconds)
24-02-07
System Options for Transfer - Trunk-to-Trunk Transfer
Release Warning Tone
1800 (seconds)
24-02-10
System Options for Transfer - Disconnect Trunk-to-
Trunk
0 (seconds)
25-07-07
System Timers for VRS/DISA - Long Conversation
Warning Tone Time
30 (seconds)
25-07-08
System Timers for VRS/DISA - Long Conversation
Disconnect Time
15 (seconds)
80-01-02 (35)
Service Tone Setup - Basic Tone Number
0~33
0 = No Tone
33 = Default Time Slot
Operation
Method A - Tandem Trunking from Conference
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press
Conf
softkey or
DND/CONF
key.
3. Place or answer second trunk call.
4. To set up the tandem call, press
Conf
softkey or
DND/CONF
key twice.
This sets up a Conference between you and both outside parties.
5. Press
Transfer
.
- OR -
Press
Hold
and dial
#8
or the service code set for Unsupervised Conference/Tandem Trunking in
Program 11-12-57.
The line keys for the trunks blink green as long as the Unsupervised Conference continues.
To end the Tandem Call:
1. Press either flashing
line
key.
The line keys light steadily (green). You can listen (i.e., monitor) to the call or rejoin the conversation,
based on the setting in Program 20-13-10.
2. Press
Speaker
or hang up.
If Program 20-13-10 is set to 0, the Conference ends and the line keys go out.
ISSUE 1.0
SL1000
T
Features and Specifications Manual
1-491
Summary of Contents for SL1000
