NEC SL1000, Features And Specifications Manual

Page: 18 / 588

Key for Entering Names
Use this keypad digit . . . When you want to. . .
7 Enter characters: P-S , p-s , 7 .
8 Enter characters: T-V , t-v , 8 .
9 Enter characters: W-Z , w-z , 9 .
0 Enter characters: 0 ! “ # $ % & ’ ( ) ô õ ú å ä æ ö ü α ε θ В
*
Enter characters:
*
+ , - . / : ; < = > ? π Σ σ Ω ∞ ¢ £
# # = Accepts an entry (only required if two letters on the same key are needed - ex:
TOM). Pressing # again = Space.
Clear/Back or DND Clear the character entry one character at a time.
Flash Clear all the entries from the point of the flashing cursor and to the right.
7. Press Hold .
8. Press Speaker to hang up.
To store a Station Speed Dialing number (Single Line Telephones only):
1. Lift the Handset.
2. Dial 855 .
3. Dial the Station Speed Dial buffer number to be programmed ( 0 ~ 9 ).
1 = Station Speed Dial Buffer 1
2 = Station Speed Dial Buffer 2
3 = Station Speed Dial Buffer 3
4 = Station Speed Dial Buffer 4
5 = Station Speed Dial Buffer 5
6 = Station Speed Dial Buffer 6
7 = Station Speed Dial Buffer 7
8 = Station Speed Dial Buffer 8
9 = Station Speed Dial Buffer 9
0 = Station Speed Dial Buffer 10
4. Dial the telephone number you want to store (up to 36 digits).
Valid entries are 0~9, # and
*
.
A Single line set cannot program a pause or flash in a spd bin.
5. Hang up.
To dial a Station Speed Dialing number (Multiline Terminal):
1. Press Speaker .
2. Dial #7 (default Service Code).
- OR -
Press the System Speed Dialing key (Service Code 851 : 27).
To preselect, press a line key in step 1 (instead of Speaker).
3. Dial the Station Speed Dial buffer number ( 0 ~ 9 ).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
:
:
0 = Station Speed Dial buffer 10
The stored number dials out.
ISSUE 1.0 SL1000
A
Abbreviated Dialing/Speed Dial 1-10