NEC SL1000, Features And Specifications Manual

Page: 15 / 588

Program
Number
Program Name Default Note
80-04-06 Call Progress Tone Detector Setup - ON
minimum time Type 1 (DT) = 63 (1920ms)
Type 2 (BT) = 12 (390ms)
Type 3 (RBT) = 25 (780ms)
Type 4 = 0
Type 5 = 0
80-04-07 Call Progress Tone Detector Setup - ON
maximum time Type 1 (DT) = 0
Type 2 (BT) = 20 (630ms)
Type 3 (RBT) = 40 1230ms)
Type 4 = 0
Type 5 = 0
80-04-08 Call Progress Tone Detector Setup - OFF
minimum time Type 1 (DT) = 1 (60ms)
Type 2 (BT) = 12 (390ms)
Type 3 (RBT) = 52 (1590ms)
Type 4 = 0
Type 5 = 0
80-04-09 Call Progress Tone Detector Setup - OFF
maximum time Type 1 (DT) = 1 (60ms)
Type 2 (BT) = 20 (630ms)
Type 3 (RBT) = 80 (2430ms)
Type 4 = 0
Type 5 = 0
Operation
To store an Speed Dialing number (display telephones only):
1. Press Speaker .
2. Dial 853 (for system) or 854 (for group).
3. Dial system or group storage code.
Initially, there are 900 System Speed Dialing codes. There are Group Speed Dialing codes only if you de-
fine them in programming.
4. Dial telephone number you want to store (up to 36 digits).
Valid entries are 0 ~ 9 , # and
*
. To enter a pause, press Transfer . To store a Flash, press Flash .
Enter @ for await answer before sending following digits on ISDN.
5. Press Hold .
6. Enter the name associated with the Speed Dialing number.
Table 1-1 Keys for Entering Names
Use this keypad digit . . . When you want to. . .
1
Enter characters: 1 @ [ ¥ ] ^ _ ` { | } Á À Â Ã Å Æ Ç É Ê ì ó 0
2 Enter characters: A-C , a-c , 2 .
3 Enter characters: D-F , d-f , 3 .
4 Enter characters: G-I , g-i , 4 .
5 Enter characters: J-L , j-l , 5 .
6 Enter characters: M-O , m-o , 6 .
7 Enter characters: P-S , p-s , 7 .
8 Enter characters: T-V , t-v , 8 .
9 Enter characters: W-Z , w-z , 9 .
ISSUE 1.0 SL1000
A
Features and Specifications Manual 1-7