![background image](http://html.mh-extra.com/html/nec/sl1000/sl1000_features-and-specifications-manual_248475075.webp)
Call Forwarding, Off-Premise
Description
Off-Premise Call Forwarding allows an extension user to forward their calls to an off-site location. By
enabling Call Forward, Off-Premise, the user can stay in touch by having the system forward their calls
while they are away from the office. The forwarding destination can be any telephone number the user
enters, such as a mobile phone, home office, hotel or meeting room. Off-Premise Call Forwarding can
route the off-site telephone number over a specific trunk or through a trunk group, Automatic Route
Selection or Trunk Group Routing.
Off-Premise Call Forwarding reroutes the following types of incoming calls:
•
Ringing intercom calls from co-worker’s extensions
•
Calls routed from the VRS or Voice Mail
1
•
Direct Inward Lines
1
•
DISA and DID calls to the forwarded extension
1
•
Transferred calls
1
1.
Off-Premise Call Forwarding can reroute an incoming trunk call only if the outgoing trunk selected has disconnect supervi-
sion enabled (refer to the Programming section).
Off-Premise Call Forwarding does not reroute Call Arrival (CAR) Keys,Virtual Extension keys or Ring
Group calls (i.e., trunk ringing according to Ring Group assignments made in Program 22-04 and
Program 22-05).
Conditions
•
If a call that forwards Off-Premise goes out on a trunk assigned as TIE or DID, and the called party
does not answer before the timer in Program 34-07-05, the call recalls to the station that performed
the transfer.
•
Call Forwarding Off-Premise requires either loop start trunks with disconnect supervision or ground
start trunks.
•
The trunk access code and the outside telephone number combined cannot exceed 24 digits.
•
Call Forwarding an extension in a Department Group prevents that extension from receiving Depart-
ment Pilot Calls.
•
If a Programmable Function key is not defined for Call Forwarding (10~17), the DND key flashes to
indicate that the extension is call forwarded.
•
DID calls to an extension with Off-Premise Call Forwarding set do not recall if there is no answer.
•
Door Boxes must be programmed for the calls to be transferred Off-Premise.
•
The outside number Call Forwarding dials can only be a number normally allowed by the forwarded
extension Toll Restriction.
•
In systems with a PZ-VM21, callers to an extension forwarded off-premise hear, “Please hold on,
your call is being rerouted.” This option can be disabled in Program 40-10-01 by setting it to disable.
•
When a station is in DND and any Call Forwarding Off Premise is set, the call forwards immediately.
•
Call Forwarding, Off-Premise is not supported when using Alternate Trunk Group Routing.
Default Settings
Disabled
System Availability
Terminals
All Stations
ISSUE 1.0
SL1000
C
Features and Specifications Manual
1-67
Summary of Contents for SL1000
