![background image](http://html.mh-extra.com/html/nec/sl1000/sl1000_programming-manual_248471013.webp)
S
ECTION
1 BEFORE YOU START PROGRAMMING
Before customizing your system be sure to read this chapter first.
This chapter provides you with detailed information about the system programs. By changing a
program, you change the way the feature associated with that program works. In this chapter, you find
out about each program, the features that the program affects and how to enter the program data into
system memory.
S
ECTION
2 HOW TO USE THIS MANUAL
This section lists each program in numerical order. For example, Program 10-01 is at the beginning of
the section and Program 92-01 is at the end. The information on each program is subdivided into the
following headings:
Description
describes what the program options control. The Default Settings for each program are
also included. When you first install the system, it uses the Default Setting for all programs. Along with
the Description are the
Conditions
which describe any limits or special considerations that may apply
to the program.
The reverse type (white on black) just beneath the Description heading is the program access level.
You can only use the program if your access level meets or exceeds the level the program requires.
Refer to
Section 3 How to Enter Programming Mode
on page 1-2 for a list of the system access
levels and passwords.
Feature Cross Reference
provides you with a table of all the features affected by the program. You
will want to keep the referenced features in mind when you change a program. Customizing a feature
may have an effect on another feature that you did not intend.
Telephone Programming Instructions
shows how to enter the program data into system memory.
For example:
1
Enter the programming mode.
2
15-07-01
tells you to enter the programming mode, dial 150701 from the telephone dial pad. After you do, you
will see the message “15-07-01 TEL” on the first line of the telephone display. This indicates the
program number (15-07), item number (01), and that the options are being set for the extension . The
I
1
Introduction
Programming Manual
1-1
ntroduction
Summary of Contents for SL1000
