Program
31
Program 31 : Paging Setup
31-03 : Internal Paging Group Settings
Level
IN
Description
Use
Program 31-03 : Internal Paging Group Settings
to assign names to Internal Paging Groups
(i.e., Page Zones) and to define the splash tone for Internal Paging.
The system shows the names you program on the telephone display. Use the following chart when
entering and editing text. When using the keypad digits, press the key once for the first character, twice
for the second character, etc. For example, to enter a C, press 2 three times. Press 2 six times to
display the lower case letter.
Key for Entering Names
When entering names in the procedures below, refer to this chart. Names can have up to 12 digits.
When you want to . . .
Use this keypad digit . . .
1
Enter characters:
2
Enter characters:
A-C, a-c, 2.
3
Enter characters:
D-F, d-f, 3.
4
Enter characters:
G-I, g-i, 4.
5
Enter characters:
J-L, j-l, 5.
6
Enter characters:
M-O, m-o, 6.
7
Enter characters:
P-S, p-s, 7.
8
Enter characters:
T-V, t-v, 8.
9
Enter characters:
W-Z, w-z, 9.
*
Enter characters:
Enter characters:
#
# = Accepts an entry (only required if two letters on the same key are needed - ex: TOM).
Pressing # again = Space. (In system programming mode, use the right arrow soft key instead
to accept and/or add a space.)
Clear the character entry one character at a time.
Clear/Back
Clear all the entries from the point of the flashing cursor and to the right.
Flash
Input Data
Internal Paging Group Number
01~32
Default
Input Data
Item
Item No.
01
Internal Paging Group Name
Assign name to Internal Paging Groups (i.e.,
Page Zones). The system shows the name
you program on the telephone display.
Up to 12 Characters
Refer to default table.
02
Internal Paging Splash tone type
Allow an extension to have normal (0), muted
(1) or no (2) Internal Paging alert beeps
before a Paging announcement.
0 = Ordinary volume
1 = Mute
2 = No tone
0
Issue 0.1
SL1000
Program 31 : Paging Setup
2-296
Summary of Contents for SL1000
