Program
47
Number Option
Normally, the corresponding Number option should be XXX. Note that the key you choose for this
action is the first digit of the called extension number.
For example, to allow callers to place Screened Transfers to extensions 301~399, for key 3 enter TRF
for the Action and XXX for the corresponding Number.
To have Screened Transfer call a specific extension, the corresponding Number option should be that
extension number. The caller then dials that single digit to reach the extension.
For example, to have callers dial 8 to reach extension 303, for key 8 enter TRF for the Action and 303
for the corresponding Number.
UTRF Action - Unscreened Transfer (2) (UTRF)
Use this action to allow an Automated Attendant caller to place an Unscreened Transfer to an exten-
sion. This is similar to telephone system unscreened transfers in which the transferring party
immediately extends the call. After an Automated Attendant caller dials an extension, InMail transfers
the call to the destination and hangs up. Any recalls or additional routing are handled by the telephone
system - just as with any other unscreened transfer.
Number Option
Normally, the corresponding Number option should be XXX. Note that the key you choose for this
action is the first digit of the called extension number.
For example, to allow callers to place Unscreened Transfers to extensions 301~399, for key 3 enter
UTRF for the Action and XXX for the corresponding Number.
To have Unscreened Transfer call a specific extension, the corresponding Number option should be
that extension number. The caller then dials that single digit to reach the extension.
For example, to have callers dial 8 to reach extension 303, for key 8 enter UTRF for the Action and
303 for the corresponding Number.
REC1 Action - Quick Message With Greeting (3) (REC1)
Use this action to allow an Automated Attendant caller to leave a Quick Message at an extension. With
this action, the caller hears the extension greeting prior to leaving the message.
Number Options
To have the caller leave a quick Message at a specific extension, the corresponding Number option
should be the extension number.
To have the caller leave a Quick Message at any caller-dialed extension, the corresponding Number
option should be IXXX.
To have the caller leave a Quick Message at a caller-dialed extension in a specific range, the corre-
sponding Number option should be XXX.
For example, to allow callers to leave a Quick Message extensions 301~399, for key 3 enter REC1 for
the Action and XXX for the corresponding Number.
REC2 Action - Quick Message Without Greeting (4) (REC2)
Use this action to allow an Automated Attendant caller to leave a Quick Message at an extension. With
this action, the caller does not hear the extension greeting prior to leaving the message. Instead, the
caller hears the voice prompt Recording followed by a beep.
Number Option
Issue 0.1
SL1000
Program 47 : InMail
2-384
Summary of Contents for SL1000
