second row of the display “KY01 =
*
01” indicates that Key 01 is being programmed with the entry of
*
01. The third row allows you to move the cursor to the left or right, depending on which arrow is
pressed. To learn how to enter the programming mode, refer to
How to Enter Programming Mode
on
this page below.
S
ECTION
3 HOW TO ENTER PROGRAMMING MODE
To enter programming mode:
1
Go to any working display telephone.
In a newly installed system, use extension (port 1).
2
Do not lift the handset.
3
Press
Speaker
.
4
#
*
#
*
.
5
Dial the system pa
Hold
. Refer to the following table for the default system passwords. To
change the passwords, use
90-02 : Programming Password Setup
Password
User Name
Level
Programs at this Level
********
nec-i
1(MF)
Manufacture Level (MF)
80-02, 81-04, 81-05, 82-02, 82-05,
12345678
tech
2 (IN)
Installation (IN):
All programs in this section not listed for MF, SA, & SB
0000
admin1
3 (SA)
System Administrator - Level 1 (SA):
10-01, 10-02, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-23,
10-24, 10-25, 10-28, 10-29, 10-45, 12-02, 12-03, 12-04, 12-08, 15-01,
15-07, 15-09, 15-10, 15-11, 20-16, 20-34, 21-07, 21-14, 22-04, 22-11,
22-17, 25-08, 30-03, 30-04, 32-02, 45-02, 84-22, 90-03, 90-04, 90-06,
90-07, 90-19, 90-57, 90-58, 90-59, 90-65
9999
admin2
4 (SB)
System Administrator - Level 2 (SB):
13-04, 13-05, 13-06, 13-11, 21-20
S
ECTION
4 HOW TO EXIT PROGRAMMING MODE
To-exit the programming mode:
When you are done programming, you must be out of a program option to exit (pressing the
DND/CONF
key will exit the program option).
1
Press
DND/CONF
key to exit the program options, if needed.
Issue 0.1
SL1000
Introduction
1-2
Summary of Contents for SL1000
