NEC SL1000, Programming Manual

Page: 216 / 580

Program
21
Program 21 : Outgoing Call Setup
21-01 : System Options for Outgoing Calls
Level
IN
Description
Use Program 21-01 : System Options for Outgoing Calls to set the system options for Outgoing
Call Service.
Input Data
Item No. Item Input Data Default Related Program
01 Seizure Trunk Line Mode
Select the trunk based off the
Trunk Route Priority (0) or based
off the trunk that has not been
used in the longest time (1).
0 = Priority Route
1 = Circular Route 0 14-05
14-06
02 Intercom Interdigit Time
When placing Intercom calls,
extension users must dial each
digit in this time.
0~64800 (sec) 10
03 Trunk Interdigit Time (External)
The system waits for this time to
expire before placing the call in a
talk state (Call Timer starts after
time expires, Voice Over and
Barge-In are not allowed until after
time expires).
0~64800 (sec) 10 14-02-08
04 Dial Tone Detection Time
If dial tone detection is enabled,
the system waits this time for the
Telco to return dial tone. When the
time expires, the system assumes
dial tone is not present. To disable
this time (and have the system wait
continuously), enter 0.
0~64800 (sec) 5 14-02-05
05 Disconnect Time when Dial Tone
not Detected
If 14-02-11 is enabled, the system
skips over a trunk if dial tone is not
detected. This option pertains to
calls placed using Speed Dial,
ARS, Last Number Redial or Save
Number dialed. It does not pertain
to line key or Direct Trunk Access
calls.
0~64800 (sec) 0
06 Dial Pause at First Digit 0~64800 (sec) 3
07 Toll Restriction Override Time
After dialing the Toll Restriction
Override codes, the system
removes Toll Restriction from the
extension for this time.
0~64800 (sec) 10 20-08-06
21-07
08 Preset Dial Display Hold Time 0~64800 (sec) 5
09 Ringdown Extension Timer
(Hotline Start)
A Ringdown extension automati-
cally calls its programmed
destination after this time.
0~64800 (sec) 5 20-08-09
21-11
Issue 0.1 SL1000
Program 21 : Outgoing Call Setup
2-196