Program
31
Program 31 : Paging Setup
31-01 : System Options for Internal/External Paging
Level
IN
Description
Use
Program 31-01 : System Options for Internal/External Paging
to define the system options for
Internal/External Paging.
The system shows the name you program on the telephone display. Use the following chart when
entering and editing text. When using the keypad digits, press the key once for the first character, twice
for the second character, etc. For example, to enter C, press 2 three times. Press 2 six times to display
the lower case letter.
Key for Entering Names
When entering names in the procedures below, refer to this chart. Names can have up to 12 digits.
When you want to. . .
Use this keypad digit . . .
1
Enter characters:
2
Enter characters:
A-C, a-c, 2.
3
Enter characters:
D-F, d-f, 3.
4
Enter characters:
G-I, g-i, 4.
5
Enter characters:
J-L, j-l, 5.
6
Enter characters:
M-O, m-o, 6.
7
Enter characters:
P-S, p-s, 7.
8
Enter characters:
T-V, t-v, 8.
9
Enter characters:
W-Z, w-z, 9.
*
Enter characters:
#
# = Accepts an entry (only required if two letters on the same key are needed - ex: TOM).
Pressing # again = Space. (In system programming mode, use the right arrow soft key instead
to accept and/or add a space.)
Clear the character entry one character at a time.
Clear/Back
Clear all the entries from the point of the flashing cursor and to the right.
Flash
Input Data
Item No.
Item Name
Input Data
Default
Related Program
01
All Call Paging Zone Name
Assign a name to each All Call Internal
Paging zone. The name shows on the
display of the telephone making the
announcement.
Up to 12
Characters
GRP ALL
11-12-19
31-02-02
02
Page Announcement Duration
This timer sets the maximum length of
Page announcements.(Affects External
Paging only)
0~64800
(sec)
1200
04
Privacy Release Time
Once the user initiates a Meet-Me Confer-
ence or Voice Call Conference, the
system waits this time for the Paged party
to join the call.
0~64800
(sec)
90
Issue 0.1
SL1000
Programming Manual
2-293
Summary of Contents for SL1000
