Program
92
Program 92 : Copy Program
92-03 : Copy Program by Port Number
Level
IN
Description
(This program is available only via telephone programming and not through PC Programming).
Use
Program 92-03 : Copy Program by Port Number
to copy extension and the data of each
outside line.
Input Data
Program Number
XX-XX
Item No.
Item
Input Data
01
Source Number
Enter the port number from where the data is to be copied.
• For Trunk Base : Trunk Port
Number
1~142
• For Trunk Group Base : Trunk
Group Number 1~25
• For Extension Number :
1~128
Including Virtual Extension :
1~178
• For Department Group Base :
Department Group Number 1~32
• For DSS : (DSS Console Number
1~12
02
Destination Number (From)
Enter the first port number to where the information is to be
copied
03
Destination Number (To)
Enter the last port number to where the information is to be
copied. If the information is to be copied only to one port, enter
the information entered in the Destination Number (From) entry.
Program that can be copied is same as <PRG92-01>
Conditions
None
Feature Cross Reference
None
Issue 0.1
SL1000
Program 92 : Copy Program
2-552
Summary of Contents for SL1000
