![background image](http://html.mh-extra.com/html/nec/sl1000/sl1000_programming-manual_248471015.webp)
2
Press
Speaker
. If changes were to the system programming, "Saving System Data" is displayed.
3
The display shows "Complete Data Save" when completed and exits the telephone to an idle
mode.
To save a customer’s database, a blank Compact Flash (CF) Card is required. Insert the CF Card into the
CPU and, using Program 90-03, save the software to the CF Card. (Program 90-04 is used to reload the
customer data if necessary.) Note that a CF Card can only hold one customer database. Each database to
be saved requires a separate drive.
CF card
CF Slot (CN2)
CPU card
PZ-VM21
S
ECTION
5 USING KEYS TO MOVE AROUND IN THE
PROGRAMS
Once you enter the programming mode, use the keys in the following chart to enter data, edit data and
move around in the menus.
Table 1-1
Keys for Entering Data
Keys for Entering Data
Use this key...
When you want to...
0~9 and
*
Enter data into a program.
Hold
Complete the programming step you just made (e.g., pressing
Enter
on a PC keyboard). When
a program entry displays, press
Hold
to bypass the entry without changing it.
Clear/Back
Delete the entry to the left (e.g., pressing
Backspace
on a PC keyboard).
Flash
Delete or clear all characters to the right of the cursor.
DND/CONF
Exit one step at a time from the program window currently being viewed.
For example, if programming item 5 in 15-03, pressing
DND/CONF
allows you to enter a new
option in program 15-03. Pressing
DND/CONF
again allows you to select a new program in the
15-XX series. Pressing Answer a third time allows you to enter a new program beginning with
1
. Pressing
DND/CONF
one last time brings you to the beginning program display, allowing
you to enter any program number.
Mute
Switch between the different input data fields by pressing
Mute
. The cursor moves up to the
top row of the display. Pressing
Mute
again moves the cursor back to the middle row.
Scroll backward through a list of entry numbers (e.g., from extension etc.) or through entries in
a table (e.g., Common Permit Table).
If you enter data and then press this key, the system accepts the data before scrolling forward.
Scroll forward through a list of entry numbers (e.g., from extension etc.) or through entries in a
table (e.g., Common Permit Table).
If you enter data and then press this key, the system accepts the data before scrolling
backward.
Issue 0.1
SL1000
Programming Manual
1-3
Summary of Contents for SL1000
