![background image](http://html.mh-extra.com/html/nec/sl1000/sl1000_programming-manual_248471034.webp)
Program
10
Program 10 : System Configuration Setup
10-08 : Pre-Ringing Setup
Level
IN
Description
Use
Program 10-08 : Pre-Ringing Setup
to enable or disable pre-ringing for trunk calls. This sets
how a trunk initially rings a telephone. With pre-ringing, a burst of ringing occurs as soon as the trunk
LED flashes. The call then continues ringing with the normal ring cadence cycle. Without pre-ringing,
the call starts ringing only when the normal ring cadence cycle occurs. This may cause a ring delay,
depending on when call detection occurs in reference to the ring cycle.
Input Data
Item No.
Description
Input Data
Default
01
Pre-Ringing
0 = No
1 = Yes
0
Conditions
• Used with Analog Trunks only.
Feature Cross Reference
• Central Office Calls, Answering
• Synchronous Ringing
Issue 0.1
SL1000
Program 10 : System Configuration Setup
2-14
Summary of Contents for SL1000
