Program
10
Program 10 : System Configuration Setup
10-26 : IP System Operation Setup
Level
IN
Description
Use
Program 10-26 : IP System Operation Setup
to enable or disable the Peer to Peer feature for
SIP MLT and SIP IP stations.
Input Data
Item No.
Item
Input Data
Default
01
Peer to Peer Mode
0 = Off
1 = On
1
02
RTP Forwarding Mode
0 = Disable
1 = Enable
0
03
SIP Peer to Peer Mode
0 = Off
1 = On
1
04
DT700 Peer to Peer Mode
0 = Off
1 = On
1
05
SIP CTI Mode
When SIP CTI Mode is set as 1 (Mode1) it will
ignore the setting at 10-26-03
0 = Disable
1 = Mode1
0
Conditions
• Disabling 10-26-04 results in SIP MLT Station-to-SIP MLT Station calls using a DSP resource.
• SIP-to-SIP MLT Station does not support Peer to Peer function and will result in using a DSP re-
source.
• Disabling 10-26-03 results in SIP IP Station-to-SIP IP Station calls using a DSP resource.
Feature Cross Reference
None
Issue 0.1
SL1000
Programming Manual
2-31
Summary of Contents for SL1000
