![background image](http://html.mh-extra.com/html/nec/sl1000/sl1000_programming-manual_248471282.webp)
Program
25
Program 25 : VRS/DISA Setup
25-06 : VRS/DISA One-Digit Code Attendant Setup
Level
IN
Description
Use
Program 25-06 : VRS/DISA One-Digit Code Attendant Setup
to set up single digit dialing
through the VRS. This gives VRS callers single key access to extensions, the company operator,
Department Calling Groups and Voice Mail. For each VRS message set to answer outside calls (refer
to Program 25-04 and 25-05), you specify:
• The digit the VRS caller dials (0~9,
*
, #). Keep in mind that if you assign destinations to digits,
outside callers cannot dial system extensions.
• The destination reached (eight digits max.) when the caller dials the specified digit.
The destination can be an extension, a Department Calling pilot number or the Voice Mail master
number. A one-digit code can be assigned for each Automated Attendant message.
Example:
Message Number=01, Destination=2, Next Message Number=0, Dial=399
In this example, when 2 is dialed by an outside caller, the system transfers the call to 399. This means
that extension 200~299 cannot receive calls from VRS/DISA users during/after VRS Message 01.
Input Data
Attendant Message Number
01~100
Received Dial
1~9, 0,
*
, #
t
l
u
a
f
e
D
a
t
a
D
t
u
p
n
I
m
e
t
I
.
o
N
m
e
t
I
01
Next Attendant Message Number
0~100 (0 = No Setting)
101 = Voice Mail answers
104 = Refer to
Ring Group With No Answer/Busy
105 = Dial the other extension
0
02
Destination Number
Up to four digits
No Setting
Conditions
• Outside caller may not be able to dial individual extensions or lines if the same first digit is defined
here.
Feature Cross Reference
• Direct Inward System Access (DISA)
• Voice Response System (VRS)
Issue 0.1
SL1000
Program 25 : VRS/DISA Setup
2-262
Summary of Contents for SL1000
