NEC N8800-162F, User Manual

Page: 183 / 280

Installing and Using Utilities 5-47
Procedure in the ft server utility
1.
Select the target component by using the ft server utility.
2.
Check the current state of the target component with the LEDs. If the component is
operating, stop the component.
3.
Click the [Diagnostics] button in the [Diagnosis Information] on the target component.
The diagnosis result can be verified by the LEDs on the target component. The result of
the diagnosis is registered in the event log.
4.
Start the component.
Sample screen of ft server utility
[PCI Module]