NEC N8800-162F, User Manual

Page: 109 / 280

System Configuration 4-19
See the table below for setup options on the screen.
Option Parameter Description
Supervisor
Password is [Unset]
Set Indicates Supervisor password setup status (view
only).
User Password
is [Unset]
Set Indicates User password setup status (view only).
Set Supervisor
Password [Enter]
Press
Enter
to display the supervisor password
entry screen. This option is available only when
you log into the SETUP utility with the supervisor
password.
Set User
Password [Enter]
Press
Enter
to display the user password entry
screen. With a user password, accessing the
SETUP menus is restricted.
Password on
boot [Disabled]
Enabled Specify whether to request a password entry at
boot-up. User password setup is required
beforehand.
[ ]: factory default
IMPORTANT:
If you have logged in SETUP by using the Supervisor Password, you can check and change all
settings. If you have logged in SETUP by using User Password, you can see the settings but
cannot make changes on the settings except System Time, System Date and User Password of
Main.