NEC N8800-162F User Manual Download Page 27

Page: 27 / 280

Precautions for Use 1-9

During Operation

CAUTION

Keep animals away.

Animal’s waste or hair may get inside the equipment to cause a fire or electric
shock.

Do not place any object on top of the server.

The object may fall off to cause injuries, damage to hardware and/or a fire.

Do not leave the optical disk drive’s tray ejected.

Dust may get in the equipment to cause malfunction. The ejected tray may also
become a cause of injuries.

Do not touch the equipment when it thunders.

If it starts to thunder, do not touch the equipment and cables.
And do not install or remove the equipment. There is a risk of
an electric shock.

Summary of Contents for N8800-162F

























































































































































































































































































Search results

Summary of Contents for N8800-162F

Reviews:

Related manuals for N8800-162F

Brands by name

Popular brands

NEC N8800-162F, User Manual

Search results

Summary of Contents for N8800-162F

Reviews:

Related manuals for N8800-162F

Brands by name

Popular brands