NEC N8800-162F User Manual Download

Page: 139 / 280

Installing and Using Utilities 5-3

Tool menu

If you select this item after choosing the display language, the Tool menu appears.

You can use the below functions for maintenance.

-

Maintenance Utility
Starts up the Offline Maintenance Utility.

BIOS/FW Updating
Updates the system BIOS.

ROM-DOS Startup FD
Creates Startup FD is used for starting the ROM-DOS system.

Test and Diagnostics
Starts up the system test and diagnostics.

System Management
Starts up the system management function.

FT Maintenance Utility
Provides the function to make a back-up copy of your data(UUID).

Summary of Contents for N8800-162F

























































































































































































































































































Search results

Summary of Contents for N8800-162F

Reviews:

Related manuals for N8800-162F

Brands by name

Popular brands

NEC N8800-162F, User Manual

Search results

Summary of Contents for N8800-162F

Reviews:

Related manuals for N8800-162F

Brands by name

Popular brands