NEC N8800-162F User Manual Download

Page: 192 / 280

5-56 Installing and Using Utilities

Procedure in ft server utility

This function is not supported in the current version.

Select the target CPU module by using the ft server utility.

Check the current state of the target CPU module with the LEDs.

Select the dump acquisition method with [Dump] of the target CPU module and click the
[Harvest] button.

A certain time is required for the dump acquisition.

The dump is stored under /var/crash/ directory on the server.

The result of the dump acquisition can be viewed in the syslog.

Sample screen of ft server utility

[CPU Module]

Summary of Contents for N8800-162F

























































































































































































































































































Search results

Summary of Contents for N8800-162F

Reviews:

Related manuals for N8800-162F

Brands by name

Popular brands

NEC N8800-162F, User Manual

Search results

Summary of Contents for N8800-162F

Reviews:

Related manuals for N8800-162F

Brands by name

Popular brands