NEC N8800-162F, User Manual

Page: 65 / 280

General Description 2-29
Use of Flash FDD
Please handle the Flash FDD while noting the following:
„
Do not turn off the server while the access LED of the Flash FDD is blinking. Turning off the
server at this time can cause a failure or data corruption.
„
The Flash FDD is a consumable. If the Flash FDD causes an error, use a new Flash FDD.
„
The Flash FDD cannot be connected by way of a USB hub. Directly connect the Flash FDD
to a USB connector of the server.
„
Before touching the Flash FDD, discharge static electricity from your body by touching a
nearby metal object(such as a doorknob or aluminum frame)
„ Do not disassemble the Flash FDD.
„
Do not apply a strong force to the Flash FDD.
„
Do not place the Flash FDD on the area where temperature rises (such as directly exposed to
sunlight or near a heater).
„
Do not handle the Flash FDD while eating, drinking, or smoking. Also, be careful not to get
thinner, alcohol, or other corrosive substances on the Flash FDD.
„ Do not use the floppy disk in a dusty place.
„
Be careful when connecting the Flash FDD to the server.
„
After using the Flash FDD, disconnect it from the server.