NEC N8800-162F, User Manual

Page: 76 / 280

3-8 Linux Setup and Operation
Command action
1 List RAID Arrays
2 List Internal Disks
3 Make Mirroring Arrays (RAID1)
4 Repair Mirroring Arrays (RAID1)
5 Delete Mirroring Arrays (RAID1)
6 Remove Disk Partitions (RAID1)
7 Make Striping Array
(RAID1+0)
8 Delete Striping Array (RAID1+0)
c Configurations
q Quit
Command: 1
Name Partition
(Label) Status Member
============================================================
< Mirroring Array (RAID1)>
md0 /boot ( - ) DUPLEX (1)sda1 (9)sdi1
md1 swap ( - ) DUPLEX (1)sda2 (9)sdi2
md2 / ( - ) DUPLEX (1)sda3 (9)sdi3
md3 /var/crash ( - ) DUPLEX (1)sda5 (9)sdi5
(When the each RAID device Status is DUPLEX, the RAID configuration
is restored normally. This ends the disk replacement procedure.)