manualshive.com logo in svg

NEC Express5800/R120h-2M, Maintenance Manual, Page: 74 / 230

Share
Download
NEC Express5800/R120h-2M Maintenance Manual Download Page 74

1. System Utilities

 

 

Express5800/R120h-1M, R120h-2M  Maintenance Guide 

74

Chapter 2  Useful Features 

Option 

Parameter Description 

EMS Console 

[Disabled] 
Physical Serial Port 
Virtual Serial port 

Use this option to configure the ACPI serial port 
settings, which include the ability to redirect the 
Windows Server Emergency Management 
console (EMS) through either the physical or 
virtual serial port. 

 

 

[    ]:  Default setting

 
(c)  USB Options Menu 

When you select 

System Configuration

 > 

BIOS/Platform Configuration (RBSU)

 > 

System Options

 > 

USB 

Options

 from the System Utilities, the 

USB Options

 menu appears. 

For details about the options, see the table below. 

Option 

Parameter Description 

USB Control 

[All USB Ports Enabled] 
All USB Ports Disabled 
External USB Ports 
Disabled 
Internal USB Ports Disabled

All USB Ports Enabled: Enables all USB ports 
and embedded devices. All USB Ports Disabled: 
Disables all USB ports and embedded devices. 
External USB Ports Disabled: Disables only 
external USB ports. Internal USB Ports Disabled: 
Disables only internal USB ports. 

USB Boot Support 

[Enabled] 
Disabled 

Set this option to disabled to prevent the system 
from booting to any USB devices connected to 
the server. This includes preventing boot to 
virtual media devices, and the embedded SD or 
uSD card slot (if supported). 

Removable Flash Media Boot 
Sequence 

Internal SD Card First 
Internal DriverKeys First 
[External DriveKeys First] 

Use this option to select which USB or SD Card 
devices you want to search for first when 
enumerating boot devices. You can select 
whether the system boots to external USB drive 
keys, internal USB drive keys, or the internal SD 
card slot. This option does not override the 
device boot order in the Standard Boot Order 
(IPL) option. You can only configure this option 
when Boot Mode is set to Legacy BIOS. 

Virtual Install Disk 

Enabled 
[Disabled] 

Use this option to control the Virtual Install Disk. 
The Virtual Install Disk contains drivers specific to 
this server that an OS can use during installation. 
If enabled, the Virtual Install Disk appears as a 
drive in the operating system. 

Internal SD Card Slot 

[Enabled] 
Disabled 

Use this option to enable or disable the Internal 
SD Card Slot. When set to disabled, the SD card 
slot is disabled, regardless of whether an SD 
Card is installed or not. The SD Card will not be 
visible in the pre-boot environment or under the 
operating system. 

 

 

[    ]:  Default setting

 
 

 

Summary of Contents for Express5800/R120h-2M







































































































































































































































Reviews:

No comments