1. IML Error Message
Express5800/R120h-1M, R120h-2M Maintenance Guide
211
Chapter 3 Appendix
Class
Error
code
Error message
Action
OS
4
A User initiated NMI Switch event
detected
If the record results from the NMI switch
operation, an additional action is not
required.
OS
6
A User initiated remote NMI Switch event
detected
If the record results from the NMI switch
operation, an additional action is not
required.
Network
8
Network Adapter Link Down (Slot %1,
Port %2)
Contact your sales representative.
Network
9
Network Adapter Link Down
(Chassis %1, Slot %2, Port %3)
Contact your sales representative.
Drive Array
12
%1 Smart Array - Controller Failure
(Status: %2)
Contact your sales representative.
Drive Array
13
Drive Array Controller Failure
(Chassis %1, Slot %2)
Contact your sales representative.
Drive Array
14
%1 Smart Array – Drive is failed:
Port %2 Box %3 Bay %4
Contact your sales representative.
Drive Array
15
%1 Smart Array - SSD Wear Status
Level %2: Port %3 Box %4 Bay %5
Contact your sales representative.
Drive Array
16
%1 Smart Array - Predictive drive failure:
Port %2 Box %3 Bay %4
Contact your sales representative.
Drive Array
17
%1 Smart Array - Cache Status: %2
(Error Code: %3)
Contact your sales representative.
Drive Array
18
%1 Smart Array - Drive could not be
authenticated as genuine drive. Smart
Array will not control the LEDs: Port %2
Box %3 Bay %4
Contact your sales representative.
System Error
5
Unrecoverable I/O Error has occurred.
System Firmware will log additional
details in a separate IML message entry if
possible.
Contact your sales representative.
System Error
7
Server Critical Fault (Service
Information: %1)
Contact your sales representative.
System Error
8
Enclosure Induced Event (Service
Information: Enclosure Power Loss, %1)
Action is not necessary.
System Revision
2
Firmware flashed (%1)
Action is not necessary.
System Revision
3
#ILO detected invalid %1 firmware.
If the record continues, contact your
maintenance service company.
System Revision
4
#ILO was unable to automatically repair
the %1 firmware.
Update the server platform service
firmware. If the problem persists, contact
your sales representative.