manualshive.com logo in svg

NEC Express5800/R120h-2M, Maintenance Manual, Page: 176 / 230

Share
Download
NEC Express5800/R120h-2M Maintenance Manual Download Page 176

1. IML Error Message 

 

Express5800/R120h-1M, R120h-2M  Maintenance Guide 

176

Chapter 3  Appendix 

 

Power Regulator Mode: Dynamic Power Savings 
Advanced Memory Protection Mode: Advanced ECC Support 
Boot Mode: UEFI 
269 - IMPORTANT: Default configuration settings have been restored per user  
request. If Sercure Boot was enabled, related security settings may have been lost.
Action: Restore any desired configuration settings. 

Example of error message: 

This message indicates that a default value has been set for the system settings. 

 

 

Tips 

  When you call the maintenance service company, inform an error message. It 

can be useful information for maintenance. 

  In the list below, messages outputted by the option are not included. For the 

messages which the options output, refer to the manuals of options. 

  The list below includes entries composed of % and [number], such 

as %1, %2, %3, %4, etc., in error messages. When they are displayed, these 
entries are replaced by numbers or letters indicating details of situation. 

 

Summary of Contents for Express5800/R120h-2M







































































































































































































































Reviews:

No comments