1. IML Error Message
Express5800/R120h-1M, R120h-2M Maintenance Guide
205
Chapter 3 Appendix
Class
Error code
Error message
Action
UEFI
299
The Boot Mode has been changed to
UEFI Boot Mode for this boot only. On
the next reboot, the Boot Mode will
return to Legacy Boot Mode.
Action is not necessary.
UEFI
305
Redundant ROM Error: Both the
Primary and Backup System ROMs are
invalid.
Update the system ROM and the redundant ROM.
If the problem persists, contact your sales
representative.
UEFI
318
Trusted Platform Module (TPM)
Self-Test Error.
Turn off the unit, disconnect the power cord, wait
30 seconds, and then restart it. If the problem
persists, contact your sales representative.
UEFI
330
Unsupported Processor Configuration
Detected - Processors are installed in
the incorrect order.
Make sure the processor is properly installed. If the
problem persists, contact your sales
representative.
UEFI
347
NVDIMM Population Error - %1 NVDIMMs
are present in the system. Only %2
NVDIMMs are supported.
Confirm the installation of NVDIMM. In case a problem
is not resolved, contact your sales representative.
UEFI
347
NVDIMM Population Error - %1
NVDIMMs are present in the system.
Only %2 NVDIMMs are supported.
Make sure the NVDIMM is properly installed. If the
problem persists, contact your sales
representative.
UEFI
348
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2.
Registered DIMMs are only supported
when an NVMDIMM is present in the
system. (Major Code:%3, Minor
Code:%4).
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the
User's Guide
. If the problem persists, contact your
sales representative.
UEFI
349
NVDIMM Population Error - NVDIMMs
and LRDIMMs are installed in this
system. NVDIMMs are only supported
with RDIMMs on this system.
Remove the LRDIMM. For the details of the DIMM
configuration, refer to the
User's Guide
. If the
problem persists, contact your sales
representative.
UEFI
350
NVDIMM Population Error -
Processor %1, DIMM %2. NVDIMMs
and RDIMMs are in the incorrect order
on Channel %3. NVDIMMs on the
channel should be closest to the CPU.
Check and change the DIMM configuration for the
rules of the installation. For the details of the DIMM
configuration, refer to the
User's Guide
. If the
problem persists, contact your sales
representative.
UEFI
358
IMPORTANT: Processor %1, DIMM %2 -
The installed NVDIMM has a Supercap
attached. This is not supported.
Remove the Supercap which was pointed out. For
the details of the DIMM configuration, refer to the
User's Guide
. If the problem persists, contact your
sales representative.
UEFI
359
NVDIMM Population Error - Processor 1
must have at least one RDIMM installed
when NVDIMMs are present in the
system.
Check and change the DIMM configuration for the
rules of the installation. For the details of the DIMM
configuration, refer to the User's Guide. If the
problem persists, contact your sales
representative.