1. IML Error Message
Express5800/R120h-1M, R120h-2M Maintenance Guide
204
Chapter 3 Appendix
Class
Error code
Error message
Action
UEFI
236
Unsupported DIMM Configuration
Detected - Processor %1 DIMM %2.
The DIMM does not support the
required voltage. (Major Code:%3,
Minor Code:%4).
Remove the DIMM which was pointed out. For the
details of the DIMM configuration, refer to the
User's Guide
. If the problem persists, contact your
sales representative.
UEFI
237
Unsupported DIMM Configuration
Detected - Octal and Quad Rank DIMMs
are not supported on the same memory
channel . (Major Code:%1, Minor
Code:%2).
Check and change the DIMM configuration for the
rules of the installation. For the details of the DIMM
configuration, refer to the User's Guide. If the
problem persists, contact your sales
representative.
UEFI
238
Unsupported DIMM Configuration
Detected - Mixing octal rank LRDIMMs
with non-octal rank LRDIMMs is not
supported. %1 (Major Code:%2, Minor
Code:%3).
Check and change the DIMM configuration for the
rules of the installation. For the details of the DIMM
configuration, refer to the User's Guide. If the
problem persists, contact your sales
representative.
UEFI
242
Unsupported Processor Configuration
Detected - System does not support
booting with three processors installed.
Make sure the processor is properly installed. If the
problem persists, contact your sales
representative.
UEFI
243
Unsupported Processor Configuration
Detected - The installed processors are
not 4-socket capable and this server
only supports 4-socket capable
processors.
Make sure the processor is properly installed. If the
problem persists, contact your sales
representative.
UEFI
259
Unsupported Processor Configuration
Detected. All installed processors do
not have the same model number.
Make sure the processor is properly installed. If the
problem persists, contact your sales
representative.
UEFI
265
System Configuration Error. The
system configuration has exceeded the
non-volatile storage capacity of the
server and certain settings may be lost.
Set the required settings again using the System
Utility after restoring factory default settings by
selecting
System Configuration
>
BIOS/Platform Configuration (RBSU)
>
System Default Options
-
Restore Default
Manufacturing Settings
options from the menu of
the System Utility. If the problem persists, contact
your sales representative.
UEFI
270
%1 FW Communication Issue - Unable to
communicate with %2 FW. Certain
management functionality is not available.
Turn off the power of this device, pull off the power code
and after 30 minutes, reboot the device.
In case a problem is not resolved, contact your sales
representative.
UEFI
275
Unsupported Processor Detected -
Processor stepping not supported.
Contact your sales representative.
UEFI
298
IMPORTANT: The Boot Mode has been
changed to Legacy Boot Mode for this
boot only. On the next reboot, the
Boot Mode will return to UEFI Boot
Mode.
Action is not necessary.