1. System Utilities
Express5800/R120h-1M, R120h-2M Maintenance Guide
126
Chapter 2 Useful Features
Embedded Device Information
1.2.4
(1)
(Embedded RAID) Menu
When you select
System Configuration
>
(Embedded RAID)
from the SystemManager, the
(Embedded
RAID)
menu appears.
For details about the options, see the table below.
Option
Parameter
Description
Controller Information
-
Provides the information of the controller like PCI
Bus :Device:Function, Firmware Revision, UEFI
Driver Version, Controller Temperature etc.
Enable/Disable Smart array
Debug Messages
(Check Box)
Select or deselect the check box to enable or
disable the Smart array debug message.
Configure Controller Settings
-
Configures the supported controller settings,
advanced controller settings(if applicable) and
clear the controller's current configuration.
Array Configuration
-
Creates new array(s) from the list of drives
available and manages the existing arrays.
Disk Utilities
-
Displays the list of drives that are connected to
the controller and allows the user to perform
certain operations on the disks available.
Exit and launch Smart
Storage Administrator(SSA)
-
Launch the Smart Storage Administrator (SSA) to
configure RAID levels.
(2)
(Embedded LOM) Menu
When you select
System Configuration
>
(Embedded LOM)
from the SystemManager, the
(Embedded LOM)
menu appears.
For details about the options, see the table below.
Option
Parameter
Description
Firmware Image Menu
-
Firmware image information.
Disable HP Shared Memory
features
Disabled
[Enabled]
Disable usage of reserved memory regions to
allow direct assignment of device to guest virtual
machines.
Blink LEDs
[0]-X
Blink LEDs for a duration up to 15 seconds.(def:0)
Pre-boot Wake On LAN
Disabled
[Enabled]
Configure Pre-boot Wake on LAN (WOL).
Chip Type
(Display only)
Shows the type and revision number of the chip.
PCI Device ID
(Display only)
Shows the PCI device ID.
Bus:Device:Function (Display
only)
Shows the "PCI_bus_number:device_
number:function_number” of this device.
Link Status
(Display only)
Shows the link status.
Permanent MAC Address
(Display only)
Shows the fixed MAC address.
Vitual MAC Address
(Display only)
Shows the virtual MAC address.
[ ]: Default setting