NEC Express5800/R120h-2M Maintenance Manual Download Page 200

Page: 200 / 230

1. IML Error Message

Express5800/R120h-1M, R120h-2M Maintenance Guide

200

Chapter 3 Appendix

Class

Error code

Error message

Action

UEFI

2225

Secure Boot - Unable to reset one or
more keys.

Set the required settings again using the System
Utility after restoring factory default settings by
selecting

System Configuration

BIOS/Platform Configuration (RBSU)

System Defult Options

Restore Default

Manufacturing Settings

options from the menu of

the System Utility. If the problem persists, contact
your sales representative.

UEFI

2226

Secure Boot - Unable to delete one or
more variables.

Set the required settings again using the System
Utility after restoring factory default settings by
selecting

System Configuration

BIOS/Platform Configuration (RBSU)

System Defult Options

Restore Default

Manufacturing Settings

options from the menu of

the System Utility. If the problem persists, contact
your sales representative.

UEFI

2227

Secure Boot - Unable to delete one or
more entries.

Set the required settings again using the System
Utility after restoring factory default settings by
selecting

System Configuration

BIOS/Platform Configuration (RBSU)

System Defult Options

Restore Default

Manufacturing Settings

options from the menu of

the System Utility. If the problem persists, contact
your sales representative.

UEFI

2319

Test event. This is only a test.

Action is not necessary.

UEFI

2400

Slot %1 SAN Error - SAN link is down.
SAN connection not possible.

Confirm the SAN switches and the configuration.
Then reconnect SAN ports or restart the server.

UEFI

2401

Slot %1 SAN Error - Fabric Login
(FLOGI) failed. SAN connection not
possible.

Confirm the SAN switches and the configuration.
Then reconnect SAN ports or restart the server.

UEFI

2402

Slot %1 SAN Error - Name Server login
failed. Boot from SAN not possible.

Confirm the SAN switches and the configuration.
Then reconnect SAN ports or restart the server.

UEFI

2403

Slot %1 SAN Error - No targets found.
Boot from SAN not possible.

Confirm the SAN switches and the configuration.
Then reconnect SAN ports or restart the unit.

UEFI

2404

Slot %1 SAN Error - Adapter restart
failed. Firmware not ready. Boot from
SAN not possible.

Reconnect SAN ports or restart the server. If the
problem persists, contact your sales
representative.

UEFI

2405

Slot %1 Error - Vital Product Data
(VPD) is not available.

Update the firmware of the card in slot %1. If the
problem persists, contact your sales
representative.

UEFI

2406

Slot %1 NIC Error - NIC personality
(Ethernet, iSCSI, or FCoE) could not be
changed. FW may require update.

Update the firmware of the NIC card in slot %1
before restarting the server.

UEFI

2407

Slot %1 Error - The firmware update
did not complete successfully.

Update the firmware of the card again after
confirming the firmware image of the card in
slot %1 is correct.

UEFI

2408

Slot %1 Error - Firmware image
recovery not successful.

Restart the unit. If the problem persists, contact
your sales representative.

Summary of Contents for Express5800/R120h-2M







































































































































































































































Search results

Summary of Contents for Express5800/R120h-2M

Reviews:

NEC Express5800/R120h-2M, Maintenance Manual, Page: 200 / 230

Search results

Summary of Contents for Express5800/R120h-2M

Reviews: