7. Resetting and Clearing the Server
Express5800/R120h-1M, R120h-2M Maintenance Guide
59
Chapter 1 Maintenance
7.
Resetting and Clearing the Server
See this section if the server does not work or if you want to set the system settings back to the default settings.
7.1
Software Reset
In case POST processing stops and does not operate, or the server stops during the start-up of System Utility,
press <Delete> key while pressing <Ctrl> key and <Alt> key. Clear all the data in progress that are stored in
the memory and restart.
7.2
Forced Shutdown
In case you cannot turn off the power in the following situations, press the power switch of device for 4 seconds
or longer. You can forcefully turn off the power.
・
Unable to turn off the power although you have executed the shutdown from OS.
・
Unable to turn off the power although you have pressed the POWER switch.
Regarding the position of POWER switch, see
Chapter 1 (4.2 Front View (Without Front Bezel))
in
User’s Guide
.
Note
If you want to turn on the power again, do so after you wait for 30 seconds or
longer.