NEC Express5800/B120b, User Manual

Page: 60 / 382

4-10 Configuring Your Server
Peripheral Configuration
IMPORTANT:
„
Note that the interrupt and/or base I/O address are not overlapped
with others. If the value set for the interrupt or base I/O address is
used in another resource, the yellow asterisk (*) appears. Reset any
item with the yellow asterisk properly.
„
If N8403-026 RAID controller is installed, "Serial ATA", "SATA
Controller Mode Option", "SATA AHCI", and "SATA RAID" are
not displayed.
Option Parameter Description Your Setting
Serial Port B Disabled
[Enabled] Selects whether serial port B is enabled or
disabled.
Base I/O
address 3F8h
[2F8h]
3E8h
2E8h Selects the base I/O address for serial port
A.
Interrupt [IRQ 3]
IRQ 4 Selects the interrupt for a serial port A.
Serial ATA Disabled
[Enabled] Selects whether the serial ATA is enabled or
disabled.
SATA Controller
Mode Option Compatible
[Enhanced] Selects an operation mode of onboard
SATA controller. Displayed only when Serial
ATA is enabled.
Compatible mode:
SATA drives are automatically detected
and recognized as legacy mode.
Enhanced mode:
SATA drives are automatically detected
and recognized as native mode.
SATA AHCI Disabled
[Enabled] Selects whether AHCI (Advanced Host
Controller Interface) is enabled or disabled.
This item appears only when "SATA RAID"
is set to "Disabled".
SATA RAID Disabled
[Enabled] Selects whether RAID feature of onboard
SATA controller is enabled or disabled.
[ ]: Factory-set