NEC Express5800/B120b, User Manual

Page: 68 / 382

4-18 Configuring Your Server
Console Redirection Submenu
Option Parameter Description Your Setting
BIOS Redirection
Port [Disabled]
Serial Port B Specify the address/interrupt of the
serial port to which a remote console
is connected.
Baud Rate 9600
[19.2K]
38.4K
57.6K
115.2K Specify the baud rate used for the
interface with successive remote
consoles.
Flow Control None
Xon/Xoff
[CTS/RTS]
CTS/RTS+CD Specify the flow control method.
Terminal Type PC ANSI
[VT100+]
VT-UTF8 Specify the type of remote console.
Continue
Redirection after
POST Disabled
[Enabled] Specify whether to continue console
redirection feature after completion of
POST.
Remote Console
Reset [Disabled]
Enabled Specify whether to enable or disable
resetting by Escape command (Esc R)
sent from the remote console.
If the server is connected with the
management PC that uses NEC
ESMPRO Manager, this option is
always enabled even if "Disabled" is
specified here.
[ ]: Factory-set