NEC Express5800/B120b, User Manual

Page: 20 / 382

1-6 Notes on Using Your Server
– The CPU blade contains precision component that is easily affected by drastic
temperature change. If the CPU blade is used after storage or relocation, make sure that
the CPU blade is fully adapted to the operating environment.
– Make sure that the options are optional devices for the purchased blade server. If an
option can be installed or connected to the CPU blade, the option may not operate
properly and further the CPU blade may be defected.
– Do not perform any of the following operation during POST (including similar
operations from EM card and external applications).
Press the POWER switch of the CPU blade.
Press the RESET switch of the CPU blade.
Remove the CPU blade from the Blade Enclosure.
Disconnect the power cord from the power unit of the Blade Enclosure.
„
Hard disk drive
–
The hard disk drive is extremely sensitive to static electricity. Make sure to touch the
metal frame of the server to discharge static electricity from your body before handling
the hard disk drive. Do not touch the hard disk drive terminals or on-board parts by a
bare hand and place the hard disk drive directly on the desk.
– Do not give excess shocks or vibrations to the hard disk drive. Failure to follow it may
cause the hard disk drive to be defected.
– The hard disk drive to be used should be options of the purchased blade server.
– Confirm the slot to which the hard disk drive is inserted. The slot for the hard disk
drive to be connected to each CPU blade is defined previously.
– The hard disk drive contains precision component that is easily affected by drastic
temperature change. If the hard disk drive is used after storage or relocation, make sure
that the hard disk drive is fully adapted to the operating environment.
„
Optional memory, processor, mezzanine card, board, and other electronic components
–
These components are extremely sensitive to static electricity. Make sure to touch the
metal frame of the server to discharge static electricity from your body before handling
the components. Do not touch the terminals or parts on the components by a bare hand
and place the components directly on the desk.
– Make sure that the options are optional devices for the purchased blade server. If an
option can be installed or connected to the server, the option may not operate properly
and further the server itself may be defected.
– The internal option device contains precision component that is easily affected by
drastic temperature change. If the device is used after storage or relocation, make sure
that the device is fully adapted to the operating environment.
– It is recommended to use options provided by NEC. Some memory devices and hard
disk drives of other vendors are designed to be available for the server. If such an
option causes the server to be defected or damaged, you will be charged for the repair
within the warranty period.
„
Do not use a cellular phone or pager around the server.
Turn off the cellular phone or pager. Radio interference may cause malfunctions of the
server.