manualshive.com logo in svg

NEC Express5800/340Hb-R N8800-047F, User Manual

The NEC Express5800/340Hb-R N8800-047F user manual is available for download, absolutely free! This comprehensive manual provides detailed instructions and information to help you maximize the potential of your NEC product. Don't miss this opportunity to grab your free copy by visiting manualshive.com.

Share
Download
background image

7-22  

Troubleshooting

 

3.

 

Click [OK] to terminate the operation. 

To allow NEC ESMPRO Agent to receive SNMP packets sent from NEC 
ESMPRO Manager, set the send community name in NEC ESMPRO 
Manager to be the same as that accepted by the SNMP Service in NEC 
ESMPRO Agent. 

 

NEC ESMPRO Agent cannot perform correctly: 

→

 

If the SNMP Service is added after adaptation of the service pack in installation of 
OS, adapt the service pack again. If not, the SNMP Service may not operate 
correctly. This then disables NEC ESMPRO Agent to be operated. 

→

 

The SNMP Service is required for operating NEC ESMPRO Agent.   

If the SNMP Service is deleted after the installation of NEC ESMPRO Agent, 
install the SNMP Service and then reinstall NEC ESMPRO Agent. 

→

 

Some software products provided by other vendors use the SNMP Service.   

If the SNMP Service and NEC ESMPRO Agent are installed in the system in 
which such software as above is installed, it may be impossible to start NEC 
ESMPRO Agent services. If so, delete the SNMP Service once and install the 
service again. After which, reinstall NEC ESMPRO Agent and the other vendor's 
software. 

 

Total Status of the PCI Module 

→

 

When each module’s status is simplex, the total status of the PCI module 
displayed on the Data Viewer is yellow (warning) and the status will be reflected 
to the server status. The ft control software 3.0 or later does not display the 
information on Ethernet or SCSI adapter on the tree of the Data Viewer. If an error 
occurs on an Ethernet or SCSI adapter, view the alert reports. 

 

Unknown or incorrect information appears in CPU information: 

→

 

If you select [CPU Module]-[CPU] in the FTServer tree of the data viewer, 
unknown or incorrect information appears in some information items. 

The CPU information can be viewed by selecting [System]-[CPU] in the 
[ESMPRO] tree. 

 

The message prompting you to reconstruct the tree of the data viewer will appear: 

→

 

If you dynamically change the configuration of the CPU or PCI module in the 
relevant system during review of the server information by using the data viewer, 
the message prompting you to reconstruct the tree of the data viewer will appear. 
If you click the [Yes] button, the tree is reconstructed in the data viewer to reflect 
the change of the system configuration on the data viewer. 
 

Summary of Contents for Express5800/340Hb-R N8800-047F

























































































































































































































































































































Reviews:

No comments

Related manuals for Express5800/340Hb-R N8800-047F

IBM BladeCenter HS23 Service Manual preview
BladeCenter HS23
Brand: IBM Pages: 36
Paradyne FrameSaver SLV 9126 Installation Instructions Manual preview
FrameSaver SLV 9126
Brand: Paradyne Pages: 24
Sun Oracle Sun Blade T6340 Installation And Administration Manual preview
Sun Blade T6340
Brand: Sun Oracle Pages: 82
Hawking HMPS2U User Manual preview
HMPS2U
Brand: Hawking Pages: 40
IBM AMD Opteron LS20 Type 8850 Installation And User Manual preview
AMD Opteron LS20 Type 8850
Brand: IBM Pages: 68
Supermicro SUPERSERVER 2048U-RTR4 User Manual preview
SUPERSERVER 2048U-RTR4
Brand: Supermicro Pages: 152
TAPKO SIMip Operating Instructions preview
SIMip
Brand: TAPKO Pages: 2
ANTAIRA STW-611C Installation Manual preview
STW-611C
Brand: ANTAIRA Pages: 2
IBM System x3650 M4 BD Type 5466 Installation And Service Manual preview
System x3650 M4 BD Type 5466
Brand: IBM Pages: 786
NEC Express5800/R320f-E4 Installation Manual preview
Express5800/R320f-E4
Brand: NEC Pages: 88
Zeiss 5034555 User Manual preview
5034555
Brand: Zeiss Pages: 12
HPE PoLiant DL 180 Dissambly Instruction preview
PoLiant DL 180
Brand: HPE Pages: 4
HP ProLiant BL460c Gen8 User Manual preview
ProLiant BL460c Gen8
Brand: HP Pages: 84
TYAN TN70-B7016 Service Engineer'S Manual preview
TN70-B7016
Brand: TYAN Pages: 80
TYAN B8236G70W8HR-HE Service Engineer'S Manual preview
B8236G70W8HR-HE
Brand: TYAN Pages: 84
TYAN B5630G62FV10HR Service Engineer'S Manual preview
B5630G62FV10HR
Brand: TYAN Pages: 82
Black Box RAS-PutIn Installation And User Manual preview
RAS-PutIn
Brand: Black Box Pages: 93
Multitech TalkAnytime TA410 User Manual preview
TalkAnytime TA410
Brand: Multitech Pages: 209

Brands by name

Popular brands

Load more brands