NEC Express5800/340Hb-R N8800-047F, User Manual

Page: 157 / 312

System Configuration 4-33
Clear CMOS / Password (Configuring Motherboard Jumpers)
With the pre-installed SETUP utility, you can set desired passwords to protect data stored on the
server from unauthorized user access. If you forget the passwords, you can clear them by following
the procedure described in this section.
You can also use the same procedure to clear the CMOS data in the server.
IMPORTANT:
„
Clearing the CMOS data restores the factory settings.
„
To clear passwords or CMOS data, power off the server.
„
NEC recommends that you request a maintenance engineer of your service representative
having the expert knowledge on the server to clear the CMOS data and password.