NEC Express5800/340Hb-R N8800-047F, User Manual

Page: 179 / 312

Installing and Using Utilities 5-21
LAN Monitoring Threshold
Because the NEC Express5800/ft series detects hardware faults on the network in the driver level,
NEC ESMPRO Agent does not monitor line faults. Thus, the value set for "Line fault occurrence
rate" of a [LAN] tab of [NEC ESMPRO Agent properties] in the control panel is not used.
Community Authority
Depending on your OS type or its version, settings for community, SNMP service’s security
function, are not made, or default settings of authority are different.
To enable the remote shutdown and threshold change functions via NEC ESMPRO Manager, make
settings of community and set its authority to "READ CREATE" or "READ WRITE."
Monitoring in Sleep State
NEC ESMPRO Manager cannot monitor the NEC ESMPRO Agent machine in the sleep state
(system standby or system halt state).
While NEC ESMPRO Manager monitors server shutdown, the relevant NEC ESMPRO Agent
machine may be entered into the sleep state. If so, the report "server access disabled" is issued and
the status color of the server icon becomes gray. This cannot indicate whether the NEC ESMPRO
Agent machine is shut down or entered into the sleep state. Keep these in mind when operating the
system where systems to be monitored may enter the sleep state.
Monitoring with NEC ESMPRO Manager Ver.4.0 or Earlier
Some items cannot be monitored with NEC ESMPRO Manager of version 4.0 or earlier.
NEC ESMPRO Manager Ver.4.1 is registered in NEC EXPRESSBUILDER CD-ROM. Use the
NEC ESMPRO Manager Ver.4.1.
Hardware Monitoring by ESMPRO
In NEC Express5800/340Hb-R, an alert report is not issued if an error on temperature/fan/power
supply/voltage is detected in CPU module and PCI module (including expansion PCI module).
Moreover, the trees [Temperature], [Fan], [Voltage], and [Power Supply] are not displayed on
[System Environment] of Data Viewer of NEC ESMPRO Manager.