![background image](http://html.mh-extra.com/html/nec/express5800-340hb-r-n8800-047f/express5800-340hb-r-n8800-047f_user-manual_251247059.webp)
General Description 2-23
DISK LED
A DISK LED shows the status of a hard disk that is mounted in a slot of the 3.5-inch hard disk drive
bay. Combined, the disk LEDs on PCI modules 1 and 2 show the status of the hard disks.
PCI
module 1
PCI
module 2
Description Action
Green/Off
*
Green/Off
*
The hard disk drives are
mirrored and operating normally.
-
Green/Off
*
Amber
Mirroring the DISKs by the RDR
function.
Wait for the mirroring to be
completed.
Green
Amber
Some trouble occurred on a
hard disk of the PCI module 1.
The hard disk drive in the PCI
module 2 is running without
mirror.
Reconfigure the hard disk mirror.
(See “DISK OPERATIONS” in
Chapter 3, Windows Setup and
Operation)
If the problem persists, contact your
sales agent.
Amber Green/Off
*
Mirroring the DISKs by the RDR
function.
Wait for the mirroring to be
completed.
Amber
Green
Some trouble occurred on a
hard disk of the PCI module 2.
The hard disk drive in the PCI
module 1 is running without
mirror.
Reconfigure the hard disk mirror.
(See “DISK OPERATIONS” in
Chapter 3, Windows Setup and
Operation)
If the problem persists, contact your
sales agent.
Amber
Amber Mirroring DISK by Disk
Management.
Wait until the mirroring is finished.
* The DISK LEDs becomes off (blinks) when the hard disk drive is accessed.
TIPS:
When there are many accesses, the access LED will blink frequently, or seems to be off.
Check if the LED blinks in green when the number of accesses decreases, or if it is green
when there are no accesses anymore.
When you power on NEC Express5800/ft series and the access LEDs does not light green,
reinstall the hard disks. If the state remains unchanged, contact your service
representative.
Summary of Contents for Express5800/340Hb-R N8800-047F
