![background image](http://html.mh-extra.com/html/nec/express5800-340hb-r-n8800-047f/express5800-340hb-r-n8800-047f_user-manual_251247060.webp)
2-24 General Description
PCI Slot Status LED
The PCI module has three PCI Slot Status LEDs to indicate the status of PCI slot. The expansion
PCI module has three LEDs as well.
LED Status
/
Action
Red (On)
The PCI board is in offline state, or is failed.
Check if the PCI board is correctly installed. If not, re-install the board. If the
same indication persists, ask your service representative to replace the PCI
board.
Amber (On)
The PCI board operates in simplex mode.
Install the identical PCI board in the slot having the same slot number in the
other PCI module.
Off
The PCI board operates in duplex mode. Or, the PCI slot contains no board,
or off-powered.
There is no problem if the PCI board operates in duplex mode.
If no PCI board is installed, install the board correctly.
If off-powered, turn the power on.
If the same indication persists, contact your service representative.
LAN Port LED
Each PCI module has two LAN ports.
The table shown below describes the LAN port status.
Green Amber Status
/
Action
On
Off
<10/100 LAN port>
The power is normally supplied, and the port operates at 10Mbps.
<10/100/1000LAN port>
The power is normally supplied, and the port operates at 10Mbps or 100Mbps.
On
On
<10/100 LAN port>
The power is normally supplied, and the port operates at 100Mbps.
<10/100/1000LAN port>
The power is normally supplied, and the port operates at 1000Mbps.
Blink
Off
<10/100 LAN port>
Data is transmitted or received at 10Mbps.
<10/100/1000 LAN port>
Data is transmitted or received at 10Mbps or 100Mbps.
Blink
On
<10/100 LAN port>
Data is transmitted or received at 100Mbps.
<10/100/1000 LAN port>
Data is transmitted or received at 1000Mbps.
Off
Off
The port is off-powered.
Summary of Contents for Express5800/340Hb-R N8800-047F
