NEC Express5800/340Hb-R N8800-047F, User Manual

Page: 283 / 312

Option 8-5
OPTIONS
The following table lists options available for NEC Express5800/ft series.
Any other options not described in this table are maintenance parts or the one supported by
customer's request. Ask your service representative for details.
There are two types of options. For CRU (Customer Replaceable Unit), the customer can work with
it. For FRU (Field Replaceable Unit), only our field engineer can work with. For FRU options, ask
your service representative for installation or removal procedure.
IMPORTANT:
Make sure to add options in pair to configure the duplex system. Moreover,
for components to be installed in a module, it is necessary to install the same components in the
same slots (socket) in the module.
Classification
Option
CRU FRU
Add/
Replace
Description
PCI module
× √
Replace Two PCI modules are factory-installed in NEC
Express5800/ft series.
Hard disk
drive
√ ×
Add/
Replace
A PCI module can contain three hard disk drives. One
drive is factory-installed.
See "3.5-inch Hard Disk Drive" in this chapter for
details.
PCI board
× √
Add/
Replace
A PCI module can contain three PCI boards. A
factory-installed SMM board is FRU.
For setup of PCI board, see "Setup of Optional PCI
Board" in this chapter.
CPU module
× √
Replace Two PCI modules are factory-installed in NEC
Express5800/ft series.
DIMM
(memory)
× √
Add/
Replace
A CPU module can contain 12 DIMMs (12GB). Four
512MB DIMMs are factory-installed. Install four DIMMs
in group.
Processor
(CPU)
× √
Add/
Replace
A CPU module can contain four CPUs. Two CPUs are
factory-installed.
Expansion PCI
module
× √
Replace Two expansion PCI modules are factory-installed in
NEC Express5800/ft series.
PCI board
× √
Add/
Replace
An expansion PCI module can contain three PCI
boards.
For setup of PCI board, see "Setup of Optional PCI
Board" in this chapter.