![background image](http://html.mh-extra.com/html/nec/express5800-340hb-r-n8800-047f/express5800-340hb-r-n8800-047f_user-manual_251247303.webp)
Option
8-25
N8104-103 1000BASE-T Adapter
Consult your sales personnel for details when purchasing this hardware.
IMPORTANT:
Note the following about this product:
It is advisable to add this product to such environment that each system is used for a
different purpose (ex. system line, maintenance, monitoring) and multiple accesses do not
occur simultaneously.
If there are multiple accesses, the processing power and transmission speed may be
somewhat affected.
For LAN cable’s connector, use the RJ-45 connector which is compliant with IEC8877
standard. Using a different connector may make it difficult to remove the connector.
Slots to install the board
PCI slot for
PCI module
PCI slot for
expansion PCI
module
Group 1
Group 2
Group 1
Group 2
N code
Name
#1 #2 #3 #1 #2 #3 #1 #2 #3 #1 #2 #3
Remarks
N8104-103 1000BASE-T
Adapter
–
√
√
–
√ √ √ √ √ √ √ √
Each PCI module can
contain one board
only.
Each expansion PCI
module can contain
two boards.
√
: Can be installed. –: Cannot be installed.
IMPORTANT:
The server can contain up to six sets of PCI boards: optional PCI board
(N8804-001P1, N8104-84, or N8104-103) and internal LAN controller (100BASE-TX or
1000BASE-SX).
Installation of driver
The NEC Express5800/ft series uses a pair of N8104-103 boards in duplex mode.
After installing the OS, follow the steps below to install a driver before setting a dual configuration:
IMPORTANT:
Please use the CD-ROM for NEC Express5800/ft series for installation. If you
use the floppy disk provided with the network card, it will not operate properly. (PROSetII will
not start.)
NOTE:
To perform this procedure, you have to log on the system as an Administrator or a
member of the Administrators group.
Summary of Contents for Express5800/340Hb-R N8800-047F
