Windows Setup and Operation 3-3
IMPORTANT:
When the number of hard disk device built in
this server is less than 6, the number of slots
to which each disk is attached and the number
of disks displayed at the Windows disk
management may be different. If the disk
device is added or changed, or if the external
storage device is connected, the disk numbers
and slot numbers may be different. Also,
rebooting system may reallocate the disk
numbers. On the other hand, the slot number
to attach a disk is the same with the target ID
of SCSI. When creating or repairing mirror
volume, be sure to check the target ID by
following the procedures below.
The pairs of mirror disks as shown above can be created by selecting hard disks whose target IDs
are identical in the disk properties
and by making pairs of disks whose target IDs are 0 and 3, 1 and
4, and 2 and 5, which are displayed through [Disk View]. The following explains how to confirm
the target ID:
1.
Click [Start]
→
[Administrative Tools]
→
[Computer Management]. The [Computer
Management] window appears.
2.
Click [Disk Management] under [Storage] in
the console tree.
3.
Right-click the disk and point to Properties to
confirm the target ID. The target ID in the
example shown here is “1.”
Slot0
Slot1 Slot2
Slot3
Slot4
Slot5
Mirror
Mirror
Mirror
Summary of Contents for Express5800/320Fa-L
