5-76 Installing and Using Utilities
7.
After the BIOS update for a single CPU module is completed, click [Jump Switch] in [Jump
Switch].
The module completely updated is started and the module under operation is stopped.
Switching boards should be performed only by “Update Firmware.”
The keyboard and
mouse may not function for a few minutes while switching boards.
If the module is not switched successfully, you can continue to the next step by clicking
[Down] of the module you want to stop.
8.
Click [Diagnostics] in [Diagnostics Information] of the other stopped PCI module.
9.
Start the other inactive module.
Starting the module causes the firmware to be updated automatically. However, if the [Enable
automatic firmware update] property is disabled, the module is started but the firmware will
not be updated. In such a case, perform the following operations before starting the module:
(1) Click the [Firmware…] button in the Server Maintenance Utility screen for the target
component.
(2) On the [Firmware Update] dialog box, select
[Copy online BIOS image to offline.] as a
method for updating and click [Execute].
(3) Check the result of the update in the event log.
CHECK:
When stopping IO module, check that the status of Ethernet is “Duplex” on Server Maintenance
Utility. Do not stop the IO module especially when LAN is connected only to the IO module on
that side.
Summary of Contents for Express5800/320Fa-L
