NEC Express 5800/120Lg, Service Manual

Page: 172 / 204

B-2 Installing and Configuring Windows 2000
Overview
This appendix contains supplemental instructions needed to install and
configure hardware and software used with the Microsoft Windows
®
2000
Operating System. This information is intended to supplement the more detailed
procedural documents available from Microsoft. This information is not
intended to be the central source of installation and configuration information
for your system. Read this entire chapter along with Microsoft's Windows
®
2000 Setup procedures before starting the installation process.
Note:
Read the System Release Notes for the latest
system information before attempting to install Windows
2000 Operating System on your system.
Device Drivers
The drivers required for the devices listed in Table B-1 below are located on the
EXPRESSBUILDER CD that is included with your system. To create the
required diskettes, perform “Tools” on the
EXPRESSBUILDER CD.
!
CAUTION
When creating the required diskettes from the
EXPRESSBUILDER CD make sure you use the drivers
required for the devices on your specific system.
Always read the information in the release notes or inserts,
included with any options for they supersede the information
in this guide.
Table B-1. Device Drivers
Supported Device Required Driver Media*
SCSI Controllers
HALs Windows 2000 OEM Diskette* (If applicable)
System Board Windows 2000 Update Module**
*Diskette generated from the EXPRESSBUILDER CDROM
**Run this application from the EXPRESSBUILDER CDROM; diskette not required