![background image](http://html.mh-extra.com/html/nec/express-5800-120lg/express-5800-120lg_service-manual_251153131.webp)
Disassembly and Reassembly 4-65
5.
Tag and disconnect the LED/Switch Assembly cable (Figure 4-59, B) from
its mating connector on the system board. See Figure 4-59, C. Carefully
remove the LED/Switch assembly from the system.
Intrusion Switch Assembly
Your server system includes two chassis intrusion switches that are located on
the front and rear of the system chassis. The switches monitor the front door
being opened and the left-hand side access panel being removed. To access the
two intrusion switches you must remove the left-hand side access panel from the
system chassis.
Note:
The intrusion switch assembly consists of two
intrusion switches with cables and a single cable connector.
To remove the intrusion switch assembly (see Figure 4-60), perform the
following procedures:
1.
Prepare your system for disassembly. See
Preparing Your System for
Disassembly and Reassembly
earlier in this chapter.
2.
Remove the left-hand side access panel of the system chassis. See
Removing
the Side Access Panel
earlier in this chapter.
3.
Tag and disconnect the intrusion switch cable from its mating connector on
the system board. See Figure 4-60, C.
4.
Remove the intrusion switch located on the front and the switch located at
the rear of the chassis. See Figure 4-60, A and B. To release an intrusion
switch squeeze its two plastic snap tabs together and slide it back until it is
free of the chassis.
5.
Carefully remove the intrusion switch assembly.
A
B
C
A
Rear Intrusion Switch
B
Front Intrusion Switch
C
System Board Connector
Figure 4-60. Removing the Intrusion Switch Assembly
Summary of Contents for Express 5800/120Lg
